Table of Contents
Advertisement
2.2.2 Installing a CPU
Note in the illustration that the CPU has a gold triangular mark on one
corner. This mark indicates the processor Pin 1 that should match a
specific corner of the CPU socket.
Incorrect installation of the CPU into the socket may bend the pins and
severely damage the CPU!
1. The motherboard supports either one or two CPUs. If you are
2. If you are installing two CPUs, install in the CPU socket 2 first.
CPU onboard LED
This warning LED (LED1) lights up if you installed two CPUs of different
type/voltage. You must install identical CPUs on this motherboard.
PR-DLS533
PR-DLS533 Onboard LED
2-10
installing only one CPU, you MUST install it in CPU socket 1.
CPU Socket 1
(outer socket)
CPU Socket 2
(inner socket)
LED1
ON
CPU Type/Voltage
CPU Type/Voltage
not identical
identical
Chapter 2: Hardware setup
OFF
Advertisement
Table of Contents
