2.1
Chassis cover
The chassis features a "screwless design" that allows convenient
assembly and disassembly.
• Remove the front bezel to access the hot-swap HDDs, optical drive, and
floppy drive.
• Remove the chassis cover to access the internal components or if you
wish to install system devices.
2.1.1 Removing the front bezel
To remove the front bezel:
1. Hold the sides of the front bezel,
then slightly press the middle part
to disengage it from the front
panel.
2. Pull the bezel from the front
panel.
2-2
Press here to release
Chapter 2: Hardware setup