Rad2Go ZZ CRUISER E-023 User Manual page 2

1. To prolong motor life, push start the scooter before applying
power.
2. Power handle returns to 'off' when released.
3. Release power handle before applying brake. Do not apply
power when brake is on.
4. Charge battery and discharge at lease once every 90 days.
5. Check tire pressure regularly.
6. Do not leave the scooter in direct hot sun for long periods.
7. Operate safely and in good weather only, use safety gear
including helmet.
8. Obey the law in your city and state in all operations.
9. You are responsible for operating safely and seller assumes
no liability for misuse or operator negligence.
Note: Riding up a steady incline for a prolonged periods of time
will cause the controller to automatically cut power to the motor
to avoid burn out. In such a case let the motor cool for about 2-3
minutes before turning back on.
JET USA
INSTRUCTION
1