Transom Shower - MARKER ONE m25, m27 Owner's Manual

MARKER ONE
The system is operated by a 12V DC water pump.
The pump and tank are located in the aft port bow
storage. It is necessary for the 12V DC system to
be energized and the WATER PRESSURE switch
to be turned on to operate the water system. The
water pressure switch is located in the cabinet by
the sink. When the switch is turned on, the red light
will be illuminated.
The water pump works on demand. It will not
automatically shut off when the freshwater tank is
empty.
To clean and disinfect the water tank, refer to
Section 6, Cleaning and Disinfecting the
Freshwater System.
Consult your authorized Marker One dealer for
winterization requirements.
PLATFORM SERIES
WATER PRESSURE
COB_0401_A

TRANSOM SHOWER

There is a shower located by the transom on the
port side. The water pressure switch must be on to
use the shower. Open the cover and extend the
shower head and hose. Push the button on the top
of the shower head to activate the shower. When
finished, install the hose and shower head back in
the port and close the cover.
3-26
S 3
ECTION
COB_0419_A
M25/M27 Owner's Manual