Starting Engine; Casting Off; During Operation; Returning To Port - MARKER ONE m25, m27 Owner's Manual

MARKER ONE

Starting Engine

• Turn battery selector switch(es) to ON.
• Attach lanyard to the engine emergency stop
switch and the operator.
• Make sure shift lever is in the NEUTRAL
position.
• Move throttle lever to the IDLE position.
• Start engine. Operate the engine at 1000 RPM
and check if oil pressure is within specified
range.

Casting Off

• Allow enough room between the boat and the
dock to swing the boat away from the dock.
• Retrieve all mooring lines and fenders.
• Proceed slowly and sound a long blast to alert
other boaters you are leaving.

During Operation

• Check gauges frequently for signs of abnormal
operation.
• Check for excessive vibration.
• Monitor your fuel supply.
• Verify charging of the batteries.

Returning to Port

• Come to a stop a short distance from the dock,
then proceed slowly.
• Have your fenders, mooring lines and the crew
ready.
PLATFORM SERIES

Stopping the Engine

• Slowly bring the throttle lever to the IDLE
position.
• Move the shift lever to the NEUTRAL position.
• Turn the ignition key to the OFF position.

After Boating

• Turn off all electrical items.
• Check the bilge for water. Operate the bilge
pump, if necessary.
• Fill fuel tank to prevent moisture due to
condensation.
• Lock ignition key switch and remove the
ignition keys.
• Stow and secure all equipment.
• If possible, inspect the pontoons and propellers
for damage.
• Check for fuel, oil and water leaks.
• Clean any spills, stains or moisture from the
boat.
• Turn battery selector switch to the OFF
position.
• Remove any food, garbage and wet gear from
the boat.
• Secure storage areas, hatches and canvas as
equipped.
7-2
S 7
ECTION
M25/M27 Owner's Manual