Models With Date - Bertucci A-1S Owner's Manual

Setting instructions:
If packaging clip is on the crown (setting knob), please remove.
Note: Crown may already be in the out position or unscrewed when new.
Step 1: Turn crown counter clock-wise to unscrew crown (fig. 1).
The crown is completely unscrewed when it turns freely.
Step 2: Gently and carefully pull crown halfway out, you will feel a "click",
there will be a bit of feel here (fig. 2).
Step 3: Turn crown either clock-wise or counter clock-wise (depending on the
model) to advance the date, continue to advance the date to
yesterdays date (fig. 3).
Step 4: Carefully pull the crown out a bit further for a second "click". Turn the
crown either clock-wise or counter clock-wise (depending on the
model) to cycle the time past midnight, you will see the date advance
to todays date. Continue to advance to set the desired time, this will
ensure the AM/PM is correct (fig. 4).
Step 5: Push crown in to re-start second hand (fig. 5).
Step 6: Push in and turn crown clock-wise to engage threads. Continue to
8
turn clockwise to firmly screw down crown. Do not overtighten (fig. 5).

Models with date

Models: A-2T , B-1T
(E) (E)
See case back engraving for model/case type.
1
4
Note: Please screw down crown (setting knob) to ensure water
resistance and maintain warranty. Do not overtighten. Date will
need to be reset for months not ending with 31 days.
, C-1T, D-1T , M-1S
(E)
2 3
5 6
9