Table of Contents
Advertisement
1.6
LED information
The barebone system comes with five LED indicators. Refer to the
following table for the LED status description.
LED
System
Power LED
HDD Access LED
Message LED
Hard disk drives
Drive Status LED
Drive Activity LED
*SCSI Access Fault-Tolerant Enclosure
The Power, HDD Access, and Message LEDs are visible even if the
system front bezel is closed.
1-8
Icon
Display status Description
ON
Blinking
OFF
Blinking
OFF
!
Blinking
Green
Red
Red-Blinking
Blinking
Power LED (blue)
HDD Access LED (green)
Message LED (red)
!
Drive status LED (green/red)
Drive activity LED
System power ON
Suspend mode
No activity
Read/write data into the HDD
System is normal; no incoming event
ASMS indicates a HW monitor event
Bridge board connected to backplane
Installed HDD is in good condition
HDD failure
HDD rebuilding using the RAID card
SAF-TE* function
Read/write data into the HDD
Chapter 1: Product introduction
Advertisement
Table of Contents
