Telephoning - Amplicomms BigTel 200 User Manual

T
ELEPHONING

Telephoning

Taking a call
Your phone is ringing.
If the handset is not in the base station:
Press the Off Hook button. To activate Handsfree press
the Off Hook button once again.
If the handset is in the base station and Auto Talk is not acti-
vated:
Press the Off Hook button. To activate Handsfree press
the Off Hook button once again.
If the handset is in the base station and Auto Talk is activated:
Remove the handset from the base - the call will be
taken automatically.
Making a call
Enter the telephone number.
Delete wrong characters by pressing the softkey under
.
The telephone number is being dialled.
☞
You can also press the Off Hook button and you will hear the
dialling tone.
The entered number will be dialled immediately. It is not possible
to correct wrong digits individually using this dialling procedure.
8
Ending a call
Redial
Making a call from the call list
Helpline UK 0844 800 6503
(See page 21 for costs and hours of operation)
Press the On Hook button or replace the
/
handset in the base station.
☞
Your handset saves the last 10 dialled telephone numbers. If
a caller is stored in your phone book, the name will be displayed.
Open the redial list.
Select an entry.
/
Press the Off Hook button.
☞
Your handset saves the numbers of the last 30 incoming calls
in the call list. If a caller is stored in your phone book, the name
will be displayed.
Saving can only take place if the function "Phone number trans-
mission (CLIP)" is available at your connection and caller ID is not
suppressed by the caller or was not transmitted for any other rea-
son.
Open the call list.
Select an entry.
/
Press the Off Hook button.