Lcd Monitor Installation - Siemens CMTC1515 User Manual

Hardware Installation
5.3

LCD Monitor Installation

14
Siemens Building Technologies
Fire Safety & Security Products
1. Unpack your LCD monitor.
Make sure the following items are included in the box and are in good
1.
condition. See chapter 5.1: Scope of Delivery.
If you find that any of these items are damaged or missing, please contact
your dealer immediately.
2. Before connecting any devices, please make sure that your monitor and all
other equipment are turned off.
3. Place the monitor on a stable horizontal surface such as a table or a desk.
4. Attach the power cable to the monitor and then to a power outlet.
5. The LCD monitor comes with two video cables (D-sub 15-pin to DVI-I 29-PIN
and DVI-D 24-pin to 24-pin) for computer video applications; one each for
analog and digital signals.
Example:
a). Analog signal (D-sub 15-pin to DVI-A 29-pin cable):
Connect the DVI-A connector to the DVI input at the back of the monitor,
then connect the D-sub 15-pin connector at the back of computer.
b). Digital signal (DVI-D 24-pin to DVI-D 24-pin cable)
Connect one end of the signal cable to the DVI input on the rear of the
monitor, and connect the other end to the DVI connector to the rear of
computer.
6. Tighten the screws of the monitor cable until the connectors are fastened
securely.
7. Alternatively, connect the composite signal (video, S-video) cable from the
back of the video unit to the back of the monitor.
8. Switch on the power supply to the computer system or AV equipment, then to
the LCD monitor.
01.2006