Skin Sensitivity Test - Me Smooth Quick Reference Manual

setting up
1. Connect the power cord into the back of the base unit.
1
2. Connect the power cord to an electrical outlet.
Make sure that the applicator is placed inside its cradle.
2
3. Press the power button to turn the system on. Wait until the
indicator next to the power button turns green.
Now the system is ready for use.
3

skin sensitivity test

If you are using the system for the first time or on a new body area, choose a
small area close to the area you intend to treat, for the purpose of performing
a skin sensitivity test.
1. Use the LOW elo ˉ s level.
2. Follow the pretreatment and treatment instructions below to treat the small
area you've chosen.
3. After the skin test, wait 30 minutes and check your skin for any reaction.
4. If the treated spot appears to be red please wait 24 hours and repeat the test.
EN 2