Info Display - Audiolab 8300CD User Instructions

6: Operation - 2
Search
Press and hold on front panel or on remote to search forward through a
tracks or tracks. If you keep the button pressed, the player will search the entire
disc. When the end of the disc is reached the player will cycle around a point 1
second before the end of the disc. On releasing the button the player plays to the
end of the disc.
Press and hold the on front panel or on remote to search back through a
track or tracks. If you keep the button pressed, the player will search back through
the disc. When the start of the disc is reached, nothing further will happen. On
releasing the button the player plays from track 1.
Repeat
Press the repeat key to cycle the repeat mode
Mute
Press the MUTE key to toggle the sound off/on.
Program Play
You can create a custom program of up to 99 chosen tracks.
Program mode must be accessed when the disc is stopped.
Press PROG first to enter program mode. Press a track number, and then press
STORE to save.
To play the program: Press
To stop program play: Press .
To erase a program from memory: The program is stored in the player's memory
until erased. Press twice or eject the disc to erase stored program.

Info Display

Repeatedly press the INFO key on remote to show Artist and Title.
When playing a disc the player remembers the last INFO display
mode set. If you switch to another input and then back to CD mode,
the player recalls the last used state and plays from the point at which
you changed inputs.
The info feature requires disc support and can be enabled/disabled in
the menu. See page 9.
Selecting a Digital Input Source
Press the DIGITAL keys on the handset or the SEL buttons on the front
CD -22dB
panel to select a digital input.
Trk 1 00:28
When the input is locked, the front panel will display the input source
Mute
CD -22dB frequency. If the input display reads "Unlock", this because the source
Trk 1 00:11
is switched off, in standby or the unit is paused.
Mute
CD -22dB
There are no playback controls active when the 8300CD is processing
Trk 1 00:11
a digital coaxial or digital optical input. But HID function is available
when playing PC USB,Play, Pause, Previous track, Next track can be
controlled by the handset and front panel buttons.
CD -28dB
O Trk 00m00s Notes: We recommend you pass a Digital signal to the 8300CD
- -
without any DSP processing or resampling at the source. This will allow
CD -28dB the upsampling circuits in the 8300CD to work at their optimum.
1 Trk 03m51s
9
If there is a digital volume control on the source unit, set it at
maximum and use the volume control in the 8300CD to alter the
CD -28dB
2 Trk 07m15s
volume level. This may seem counter-intuitive but will preserve
9 8 - -
optimum performance. Consult the user manual on your source unit
CD -28dB
for advice.
6 Trk 25m45s
9 8 6 3 5 2
When an external input is playing:
CD -28dB
Trk 9 PRG 00:05
. The volume level is alterable.
. Mute is operational.
. The display can be switched off/on and the brightness can be set.
Page 7
CD -28dB
Twino
00:43
Trk 9 PRG
CD -28dB
Never change
Trk 9 00:48
PRG