Miele DA 216-2 EXT Operating And Installation Instructions page 9

b
c
d
e
f
g
h
i
j
k
l
m
This control activates the run-on option.
The fan is switched off automatically
after either 5 or 15 minutes.
n
The indicator light above the grease
filter touch control lights up when the
grease filters need to be cleaned.
The touch control is used:
– to reset the operating hours counter
after cleaning the grease filters (see
"Cleaning and Care").
– to show how long the grease filter
has been in use (see section on
"Operation / Filter operating hours
counter").
– to alter the number of hours counted
by the filter operating hours counter
(see section "Operation / Altering the
filter operating hours counter").
o
The indicator lamp above the active
charcoal filter touch control lights up
when the recirculation mode active
charcoal filters need to be replaced.
The touch control is used:
– to reset the operating hours counter
after replacing the active charcoal
filters (see "Cleaning and Care").
– to show how long the active charcoal
filters have been in use (see section
on "Operation / Filter operating hours
counter").
– to alter the number of hours counted
by the filter operating hours counter
(see section "Operation / Altering the
filter operating hours counter").
9