Page 1
Tsunami Digital Sound Decoder ® Quick Start Guide for the Blackstone Models C-19 May 2011...
Page 2
The information in this document is subject to change without notice. Neither Blackstone Models or SoundTraxx (Throttle Up!) shall be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance or use of this material.
Table of Contents All Aboard! ............1 Overview ............1 Features and Specifications ......... 2 Quick Start ............4 Let’s Get Started ..........4 Programming and Reading CVs ......5 Operating in Analog Mode........6...
All Aboard! Overview Congratulations on the purchase of your Blackstone Models C-19 with SoundTraxx® Tsunami® Digital Sound Decoder™ installed. The Tsunami Digital Sound Decoder (DSD) will provide all the pleasures of high quality, digital onboard sound and the benefits of today’s DCC (Digital Command Control) technology.
Supports extended address mode for assigning any locomotive number up to 9,999. • Supports advanced consist addressing. • Supports ‘Operation Mode Programming’, allowing CVs to be changed on the mainline without using a programming track. Blackstone Models C-19 Quick Start Guide Page 2...
CV 30 and CVs 44-46 to the default values listed in the Technical Reference. For now, simply set your controller to the appropriate address, place the locomotive on the mainline and away you go! Blackstone Models C-19 Quick Start Guide Page 4...
COMMAND STATION POWER SUPPLY COMMAND Power In BLACK STATION Power In BLACK PTB-100 ORANGE ORANGE Programming Track Output YELLOW Programming Track Output YELLOW Programming Track General Wiring Diagram for the SoundTraxx PTB-100 Blackstone Models C-19 Quick Start Guide Page 5...
Operating in Analog Mode Using a DC Power Pack Your Tsunami-equipped Blackstone Models Locomotive will also work using a conventional (DC) power pack. When analog mode is enabled, you may control your locomotive using an ordinary power-pack though operation will be a bit different than when running non-decoder equipped locomotives.
Page 11
User’s Guide. About the Whistles The Tsunami Digital Sound Decoder installed in your C-19 has multiple whistles to choose from. If you have a DCC system, you have the option of selecting something other than the default whistle. The following table lists the available whistles, selectable by programming CV 115.
Need help?
Do you have a question about the C-19 and is the answer not in the manual?
Questions and answers