HIKVISION DS-7604NI-E1 User Manual page 41

User Manual of Network Video Recorder
4. (For the encoders with multiple channels only) check the
shown in the following figure, and click OK to add multiple channels.

OPTION 3:
Steps:
1) On the IP Camera Management interface, click the Custom Adding button to pop up the Add IP Camera
(Custom) interface.
2) You can edit the IP address, protocol, management port, and other information of the IP camera to be
added.
If the IP camera to add has not been actiavted, you can activate it from the IP camera list on the
camera management interface.
3) (Optional) Check the checkbox of Continue to Add to add other IP cameras.
4) Click Add to add the camera.
For the successfully added IP cameras, the Security status shows the security level of the password of camera:
Figure 2. 21 Selecting Multiple Channels
Figure 2. 22 Custom Adding IP Camera Interface
40
of Channel Port in the pop-up window, as
checkbox