When To Change The Thread Catcher; Changing The Thread Catcher - Miele Olympus HS12 Operating Instructions Manual

Maintenance and care
When to change the thread
catcher on the standard floor
brush
The thread catcher on the floor brush
should be replaced as soon as they
appear worn.

Changing the thread catcher

Depending on model, your vacuum has
one of the following floor heads.
Floor brush SBD 350-3
^ Using a knife or similar object, lift the
thread catcher out of the slot by the
red marking on the side a.
^ Insert a new thread catcher into the
slots b.
Floor brush SBD 450-3
^ Use a knife or similar object to
remove the thread catcher pads from
the slots.
^ Insert a new thread catcher into the
slots.
New thread catcher pads can be
purchased from any authorized
Miele vacuum dealer or Miele.
22