Miele KF 9757 iD Operating And Installation Instructions page 58

Building in the appliance
Securing the appliance doors to the
furniture doors:
^ Screw each of the fixing brackets a
supplied into the pre-drilled holes in
the appliance door using hexagonal
screw b.
Make sure the two metal edges c
are aligned (Symbol II ).
^ Drill fixing holes d, and screw in the
4 x 14 mm screws e.
(With large furniture doors, attach a
second pair of fixing brackets a in the
handle region of the doors. Use the
pre-drilled holes in the appliance
doors.)
– Align depth "Z" on the furniture door:
Loosen screws f at the top of the
appliance doors, and loosen the
hexagon-headed screw g at the
bottom of the fixing bracket. By
moving the furniture doors, create a
gap of 2 mm between the furniture
door and the front edge of the niche.
58
^ Close both of the doors, and align
them with the neighbouring furniture
doors.
^ Whilst counterholding adjusting bolts
c with a screwdriver, tighten nuts a
on the appliance doors with ring
spanner b.
^ Cover strip d must be completely
hidden in the niche, and must not
protrude.
^ Tighten all screws once again.
^ Secure the appliance one more time
using screw f through the round
hole in the plastic bracket e.
^ Close the plastic bracket.