LENCO TFT-1026 User Manual page 8

SETUP MENU:
Clock
It is used to check out the current system time and set time
zone/DST.
Sleep Timer
When TV is running, start sleep function by setting Sleep Timer in any
case. This function allows the TV power off within a period of time
automatically. Supported time period are: Off, 15 Mins, 30Mins,
45Mins and 60Mins.
Auto Standby
When TV is running, Auto Power Off function can be start by setting
Auto Power off Timer in any case. This function allows user to power
off the TV within a period of time. Supported time period are: Off, 3
Hours, 4 Hours.
Hearing impared
This function offers a subtitle such as a "stroke on the door" or "the
bell starts to ring" for the current scene in case that the user is weak
in hearing.
PVR/Timeshift
1.Record File Format
Recording format: TS, PS.
2.Partition Select
Enter Partition Select menu.
Display partition's information.
Format partition function.
Set default partition function.
3.Auto Timeshift
Auto Timeshift: off (Stop auto Timeshift), Auto (Start auto
Timeshift).
4.Timeshift Buffer
Set Timeshift Buffer: auto, 30Mins, 1hr, 2hr.
5.Record List
Enter Record List menu.
Display Recorders' information.
Playback Recorders.
Setup Menu
This chapter will describe the function of Setup in Main Menu.
Index Setup Menu Items
1 OSD Timer
2 HDMI Mode
3 Blue Screen
4 Aspect Ratio
5 Reset TV Setting
6 Software Upgrade
7
Default
Value
Never
( 5, 10, 15, 20, 25, 30
Seconds, Never)
Auto
(Auto, PC , Video )
Off
(Of, On)
16:9
(Auto, 4:3, 16:9, Full, Zoom1,
Zoom2, Panorama)
--
"ENTER "
--
" ENTER "