Adjustment; Bluetooth Test Mode - Pioneer ND-BT1 Service Manual

1

6. ADJUSTMENT

6.1 BLUETOOTH TEST MODE

A
- Bluetooth Test Mode (when using BT Built-in mobile phone)
0. Specifications for BT Built-in mobile phone
A mobile phone supporting Bluetooth Ver.1.1 and mounting HFP and OPP is required.
Models with which connection has been verified are recommended.
*HFP : Hands-Free Profile, OPP : Object Push Profile
Recommneded mobile phone model;
for AVIC-HD1BT/EW5 (ND-BT1/E5)
- SonyEricsson S700i/K750i
B
for AVIC-Z1/UC + ND-BT1/E5
- AUDIOVOX SMT5600
Notes: SMT5600 is not possible to transfer whole address book at a time.
It can be transfered one by one on this model.
1. Caution
*This is a precaution for the case where the mobile phone is actually connected at the serviced site.
For AVIC-HD1BT/EW5 and AVIC-Z1/UC, up to 5 sets of Bluetooth units can be registered.
When more than 5 sets are tried to be registered, the 6th set and beyond will be overwritten. (Overwriting will
be made by selecting the model number to be overwritten.)
In the case of overwriting, be careful as the device information stored by the user will be deleted.
C
2. Outline of functions
When checking the operation using the BT built-in mobile phone, check the connection under the normal
operation.
• Checking of Bluetooth connection (authentication connection and voice connection)
• Checking of Bluetooth antenna sensitivity (connection)
3. Configuration diagram
AVIC-HD1BT/EW5, AVIC-Z1/UC
D
E
F
18
1
2
ND-BT1/E5
ND-BT1/E5
2
3
Mobile Phone
Bluetooth
3
4
4