Pix-Star FotoConnect XD User Manual page 12

Table of Contents

Advertisement

Refuse all incoming emails except those coming from your "white list" (authorized
o
individuals)
Accept all incoming emails except those coming from your "black list"
o
(unauthorized individuals)
10. How the slide-show works, 4 DISPLAY MODES
The slide-show can run in 4 different modes: the "Normal" mode, the "Collage 4 pix."
mode, the "Collage 5 pix." mode and the "Smart Fill" mode.
By default "Collage 5 pix." is activated. When a slide show starts, whether automatically
are launched from any menu of the device, it will display 5 pictures at a time in a nice
"collage" type arrangement on the screen.
You can easily change this configuration, when a slide show is playing:
1. Press MENU button
2. A menu bar with icons will show up from the left of the screen.
3. Go down to the 2nd icon from the BOTTOM named "Slide show Options" and
press
to enter
4. Go to "Display Mode" then choose one of the other 4 available modes.
From the main menu:
1. Go to " Change Settings" by pressing
2. Enter the "Slide-Show" sub-menu.
3. Go to "Display Mode" then choose one of the other 4 available modes.
The "Normal" mode shows 1 picture at a time on the screen in full mode.
The "Collage 4 pix' and "Collage 5 pix" are both a collage of 4 and 5 pictures.
The "Smart Fill" mode shows 1 picture at a time on the screen but if the picture is slightly
smaller than the screen, it will automatically make it full screen by stretching it a little
(NOTE: in this mode pictures are stretched ONLY IF the picture size ratio is close to 4:3 to
avoid too much distortion).
11. How to Change the Device Configuration
You can change most of the device configuration parameters from the CHANGE SETTINGS
menu accessible from the Main menu. Once inside this CHANGE SETTINGS menu, you can
configure:
-
LANGUAGE:
-
DATE & TIME:
-
AUTO ON/OFF:
-
SLIDE-SHOW:
-
PHOTO-MAIL:
-
WI-FI:
-
ABOUT:
-
FACTORY RESET:
The language of the user interface;
Adjust the date and time;
Adjust the auto switch on and switch off configuration;
Adjust all the parameters and options of the slide-show;
Adjust the parameters regarding photo-mail and others;
Configure the Wi-Fi connection & show related information;
Show information about the device and memory use;
Reset the device to factory settings.

Advertisement

Table of Contents
loading

Related Products for Pix-Star FotoConnect XD

Table of Contents