Start; Steam Reduction; Keeping Warm; Pre-Heat - Miele DG 5070 Operating And Installation Instructions

Settings

Start

Steam reduction

Keeping warm

Pre-heat

Recommended temperatures

36
The appliance has be set at the factory so that the
programme will start automatically a few seconds after the
last entry is made. You can alter this setting so that the
programme has to be started manually.
This function can be activated or deactivated. It is best to
deactivate it when you are cooking different types of food at
the same time, e.g. when cooking a whole meal and the
dishes need to be put into the steam combi oven at different
times.
Please note that when steam reduction is deactivated a lot of
steam will escape when you open the door and that the
keeping warm function cannot be used.
This function can be activated or deactivated.
This function can be activated or deactivated.
If you frequently change a recommended temperature it may
be a good idea to change it permanently. You can change
the temperatures within the permitted range.