Table of Contents
Advertisement
Before using for the first time
Setting the correct boiling point for water
The boiling point for water at a high altitude above sea level
will be lower than the boiling point for water at sea level. To
adjust the boiling point for the altitude in your area, fill the
water container with mains tap water (see "Brief operating
instructions / Preparing the appliance for use") and then run
the Steam cooking / Universal (100 °C) programme for 15
minutes. Proceed as described in "Brief operating
instructions".
This procedure sets the correct boiling point for water for the
altitude in your area and also flushes out the waterways.
Warning! A lot of steam will be emitted from the appliance.
If you move house, the appliance will need to be re-set for
the new altitude if this differs from the old one by more than
300 m. To do this, descale the appliance (see "Cleaning and
care / Descaling").
21
Hide quick links:
Advertisement
Table of Contents
