Parts Description; Use And Operation - Honeywell CS071AE User Manual

PARTS DESCRIPTION

1) Remote Control
2) Control Panel
3) Remote Control Receptor
4) Louvers
WARNING -- READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER
MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
DAMAGE AND/ OR IMPAIR ITS OPERATION AND VOID THE WARRANTY.
USE & OPERATION
CONTROL PANEL
SLEEP SWING TIMER
FUNCTION BUTTONS
POWER
Press the POWER button to turn the unit on. The cooler will start automatically at medium speed. After a
few seconds the speed will switch to low. To turn the unit off, press the button again.
COOL
Please make sure water is added prior to setting the Cool Mode. Press the COOL button until the COOL
indicator light is illuminated on the control panel. This activates evaporative cooling. The water pump will
operate and you will feel the cooler air after the Honeycomb Cooling Media is completely wet.
Note: When the COOL indicator light is switched OFF, the unit can still function in a fan only mode
(without evaporative cooling). The Sleep* function can still be switched on in a Fan only mode.
SPEED
Press the SPEED button repeatedly to change the speed between Hi - Med - Lo.
The indicator light will show the selected speed:
(9)
(12)
(11)
(5)
5) Drain Plug
6) Water Level Indicator
7) Casters
8) Handle
Lo Med Hi
SPEED COOL POWER
High (Hi)
(1)
(2)
(3)
(8)
(4)
(10)
(6)
(7)
Icons on Display Screen
Power
Cool
Speed
Lo Med Hi
*Applicable for models with Sleep feature only.
Medium (Med)
EN 1
9) Rear Grill
10) Water Fill Door
11) Power Cord & Plug
12) Rear Grill Screw
Swing
Sleep*
Timer Setting
Low (Lo)