Advertisement
WARNING
WARNING
This equipment has been tested and found to comply with the limits for a Class A digital device.These
limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates,uses,and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
CAUTION
Any changes or modifications in construction of this device which are not expressly approved by the
party responsible for compliance could void the users' authority to operate the equipment.
Precautions
Use the appropriate power supply
The input power of the camera is 12V DC. Be
sure to connect the appropriate power. Incorrect
connection may cause malfunction and/or damage
to the video camera.
Do not attempt to disassemble the
camera
To prevent electric shock, do not remove screws
or covers. There are no user serviceable parts
inside. Maintenance should be performed by a
suitably qualified person only.
Handle the camera with care
Do not abuse the camera. Avoid striking, shaking
etc. The camera could be damaged by improper
handling or storage.
To prevent fire or shock hazard do not expose the
insides of the unit to rain or moisture.
This symbol alerts the user to the presence of
important operating and maintenance issues
according to the manual.
This symbol alerts the user to the presence of
uninsulated dangerous voltage within the product
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
Do not use strong abrasive detergents
when cleaning the camera body
Use a dry cloth to clean the camera. If dirt is
difficult to remove use a mild detergent and wipe
gently.
Do not aim the camera at the sun
Do not attempt to aim the camera at the sun or
other extremely bright objects that cause a smear
to appear whether the camera is operating or
not. This can damage the CCD (Charge Coupled
Device)
Do not operate near interference
When installed near equipment like wireless
devices that emit strong electromagnetic fields
some irregularities such as noise on monitor
screen may occur.
Advertisement
