Connecting A Microphone/Guitar; Recording On A Usb Device - Pyle Street Blaster X User Manual

Connecting a microphone/guitar

Using a microphone or a guitar, you can mix its sound with a source sound.
CAUTION
DO NOT connect a bass guitar to the MICROPHONE / GUITAR INPUT JACK, as it may
damage the speaker.
1. Turn the MICROPHONE INPUT LEVEL CONTROL fully counterwise.
2. Connect a microphone or a guitar to the MICROPHONE / GUITAR INPUT JACK of
the speaker.
3. Select the Bluetooth, Aux in, FM radio or USB as the source.
4. Start playback of the sound source.
5. Turn the MICROPHONE INPUT LEVEL CONTROL to adjust the microphone
volume.
6. Turn the GUITAR OUTPUT LEVEL CONTROL of your guitar to adjust the guitar
volume.

Recording on a USB device

You can record the sound source (Bluetooth, Aux in or FM radio) to a USB device by
digital recording. Before recording, connect the USB device to the speaker.
1. Press MODE button to select the sound source.
2. Start playback of the sound source.
3. Press RECORD button to start recording (F8).
4. Press RECORD button again to stop recording.
5. A folder such as "record" is created where the music files are stored. The music file
is stored in WAV format (bitrate: 128 kbps).
Note:
You can mix your guitar or vocals with a backing track from Bluetooth and record the
resulting mix to USB device.
F8
7