Getting Started; Bluetooth Function - Pyle Street Blaster X User Manual

Getting started

Charge the battery
Before using the speaker, you must charge the battery. When the battery is charging, the
BATTERY INDICATOR lights solidly. After the battery has fully charged, the light
switches off.
1. Connect the AC adaptor to the DC IN JACK of the speaker firmly, and plug it into a
wall outlet.
2. When the battery is fully charged, first disconnect the AC adaptor from the speaker,
then from the wall outlet.
Power source
1. Press the POWER SWITCH to turn on the speaker.
2. Press the POWER SWITCH again to turn off the speaker, and pull the AC adaptor
out of the wall outlet if you want to switch off completely.
3.

Bluetooth function

Pair the bluetooth device
Before using your speaker with a Bluetooth device for the first time, you must pair and
connect it to the Bluetooth device. Press the POWER SWITCH to turn on the speaker.
The display shows "HI". Then press the MODE button to select the Bluetooth mode (F1).
The BLUETOOTH INDICATOR starts to flash, and the speaker is now in pairing mode.
Pair the speaker using NFC
1. With Near Field Communication (NFC), you can easily pair and connect the speaker
to Android device with NFC.
2. If the Android device supports NFC, activate its NFC feature, and touch the NFC
area of the speaker with the NFC area of your Android device (F2). The speaker
pairs and connects to the Android device automatically. For details on NFC, see the
user guide of the Android device.
F1
F2
4