Miele HG02 Installation Instructions Manual page 19

A custom door panel matching the
kitchen cabinetry can be installed using
the provided templates and bracket.
= Panel length
= Height to the underside of the
countertop
= Control panel height*
= Toe Kick Height
Determined using the following calcula-
tion: X = A – B – C
*Control panel height is determined by
the height of the drawers in the
cabinets. This height is adjustable
1
between 4 / " and 5
2
with the filler strips provided. An
additional filler strip and foam inserts
may be ordered to reach 6" (154 mm) in
height.
3
/ " (112 - 145 mm)
4
As long as the panel length calculated
is within the Range of Panel Sizes
listed, the custom panel should fit with-
out a problem.
Length: 19" - 23
1
Width: 23 / " (598 mm)
2
Length: 21" - 25
1
Width: 17 / " (445 mm)
2
Length: 21" - 25
1
Width: 23 / " (598 mm)
2
The maximum panel length is only ap-
plicable when no filler strips are
used. The door panel thickness should
3
be / " (19 mm).
4
Custom door panels should be finished
on all edges. Trim kits are not available
for custom door panels.
3
/ " (483 - 603 mm)
4
3
/ " (533 - 654 mm)
4
3
/ " (533 - 654 mm)
4
19