Turning On; Selecting A Program; Starting A Program; Program Sequence Display - Miele G 2142 Operating Instructions Manual

Use

Turning on

^ Make sure the spray arms can rotate
freely.
^ Close the door.
^ Open the water supply, if closed.
^ Turn the dishwasher on "s".
The "Start/Stop" indicator flashes and
the indicator of the last program run
lights up.

Selecting a program

Choose your program according to the
type of load and soiling.
The "Program guide" describes the
programs and use.
26

Starting a program

^ Select the desired program with the
"Program" button.
The indicator of the selected program
lights up.
^ Press the "Start/Stop" button.
The program starts. The indicators
"Start/Stop", "Rinse" and the last
selected program light up.
Cancel a program only within the
first few minutes. Otherwise
important program steps could be
interrupted.

Program sequence display

After a program has been started the
current stage of the program is
indicated by the program cycle
indicator.