Variquest Trifecta 800 Quick Start Manual

Trifecta 800 3D Printer
™
UNBOXING TIPS
2
Remove printer accessories from the compartment.
4
Remove the printer and lament from the box.
Trifecta™ 800 Printer
Use a box cutter to trim along the taped edges and peel back the outer box aps.
The Trifecta™ 800 3D Printer can be too heavy to lift out of the box by yourself. Ask for help
to prevent injury or damages to the printer.
Make sure you have a pair of scissors handy to remove straps that fasten down printer
components during shipping.
1
Open shipping box and remove the compartment lid.
3 Remove foam bracket and take out the printer and lament.
Filament Spool
USB Cable
Power Cable
Glass Print Bed Print Bed Clips x4
5 Place the printer on a rm at surface.
Make sure the printer is located
near an accessible power outlet.
Place the Trifecta™ 800 3D printer and PLA lament
in a moisture-free and low dust environment.
Store opened spools of lament in a sealed bag with
a desiccant packet.
Hex Wrench
SD Card