Adjusting The Dosage - Miele G 5100 Operating Instructions Manual

Adjusting the dosage

In order to obtain an optimal cleaning
result you can adjust the dosing
quantity of the rinse aid.
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 0 to 6.
The amount of rinse aid dispensed can
be more than the value set due to the
automatic adjustment of the "Sensor
Wash" program.
– Use a higher setting if spots appear
on dry glassware.
^ Use a lower setting if streaking
appears on dishes or glasses.
^ Turn the dishwasher off "s".
^ Press the "Start / Stop" button and at
the same time turn the dishwasher on
s. Hold the "Start / Stop" button until
the "Start / Stop" indicator comes on.
If it does not come on, start over.
^ Press the "Delay Start" button three
times.
The "Delay Start" indicator will flash
briefly three times in intervals.
Before using for the first time
P 3 will flash in the display. This means
that the rinse aid dosage has been set
to 3 ml at the factory.
The dosage set will show in the display
after the P.
^ Select the desired setting with the
"Start / Stop" button. Every touch of
the button increases the level.
The programmed dosage is saved.
^ Turn the dishwasher off "s".
19