Install A Memory Card; Install The Battery; Charge The Battery; Replace The Back Cover - Samsung Galaxy Note 3 User Manual

Install a Memory Card

You can install an optional microSD or microSDHC
memory card (not included) to expand available
memory space.
Note: A memory card can be installed at any time; it
is not necessary to install it prior to using the device.
For more information, see

Install the Battery

1. Insert the battery into the opening on the back of
the phone, making sure the connectors align.
2. Gently press down to secure the battery.

Replace the Back Cover

1. Place the back cover onto the back of the phone
and press down.
2. Press along the edges of the back cover until
you have a secure seal.
Getting Started
Install a Memory Card.

Charge the Battery

Your device is powered by a rechargeable, standard
Li-Ion battery. A Wall/USB Charger (charging head
and USB cable) is included with the device for
charging the battery from any standard outlet.
The battery comes partially charged. A fully
discharged battery requires up to four hours of
charge time. You can use the device while charging.
Caution: Use only Samsung-approved charging
devices and batteries. Samsung accessories are
designed to maximize battery life. Using other
accessories may invalidate your warranty and may
cause damage.
1. Connect the USB cable to the charging head.
2. Locate the USB Charger/Accessory port.
3. Insert the USB cable into the port.
USB 3.0 Connector
Note: If you are using the older style USB 2.0 cable to
charge your battery, plug the flat end of the cable into
the smaller port in the device's Charger/Accessory
port.
5 Assemble Your Device