Miele G 2630 SCi Operating Instructions Manual page 55

Issue
Dishes are not dry,
glasses and cutlery
are spotted?
White residue is
visible on cutlery
and dishes,
clouding occurs on
glassware and film
can be wiped off.
Possible fault
The rinse aid setting may be
too low or the rinse aid
reservoir is empty.
Dishes were taken out too
soon.
"2 in 1" or "3 in 1" products
were used. These products
have a low drying effect.
The detergent "2 in 1" or
"3 in 1" is set, but another
product was used.
Not enough rinse aid was
used.
The salt container is empty.
The salt container lid was
not screwed on properly.
Unsuitable "2 in 1" or "3 in 1"
products were used.
The automatic water
softener unit is defective.
Frequently asked questions
Solution
Increase the dosage, refill
the reservoir or switch the
rinse aid product when
refilling, see "Before using
for the first time".
Leave dishes in longer, see
"Use".
Set the detergent type to
"Powder" and insert rinse
aid. See "Settings J -
Detergent".
Select the detergent setting
to the detergent used. See
"Settings J - Detergent".
Increase the dosage, see
"Before using for the first
time".
Increase the dosage, see
"Before using for the first
time".
Reseat and screw the lid on
firmly.
Use a different detergent.
Try using normal tabs or
normal powder detergent.
Contact Miele Technical
Service.
55