General Problems With The Dishwasher - Miele G 2143 Operating Instructions Manual

General problems with the dishwasher

Issue
The display turns off.
Detergent is left in the
dispenser at the end of
a program.
The detergent lid
cannot be closed
properly.
The door and the
interior walls are still
wet after a program has
finished.
Water remains in the
wash cabinet at the end
of a program.
Frequently asked questions
Possible fault
The dishwasher has
gone into "Standby"
mode to save energy.
The dispenser was damp
when detergent was
added.
Detergent residue is
blocking the catch.
This is not a fault!
It is the normal operating
mode of the drying
system.
The triple filter in the
wash cabinet is clogged.
The drain pump or the
non-return valve may be
blocked.
The drain hose is kinked. Remove any kinks from the
Solution
Press any button.
The display turns on again.
Dry the dispenser before
adding detergent.
Remove the residue.
The moisture will evaporate
after a short time.
Before fixing the fault:
– Turn the dishwasher off
"s".
Clean the triple filter. See
"User Maintenance
Instructions".
Clean the drain pump and
the non-return valve, see
"User maintenance
instructions".
drain hose.
35