Frequently asked questions
General problems with the dishwasher
Problem
The display turns off.
Detergent is left in the
dispenser at the end of
a program.
The detergent lid
cannot be closed
properly.
The door and the
interior walls are still
wet after a program has
finished.
Water remains in the
wash cabinet at the end
of a program.
36
Possible fault
The dishwasher has gone
into "Standby" mode to
save energy.
The dispenser was damp
when detergent was
added.
Detergent residue is
blocking the catch.
This is not a fault. It is the
normal operating mode of
the drying system.
The triple filter in the wash
cabinet is clogged.
The drain pump or the
non-return valve may be
blocked.
The drain hose is kinked.
Solution
Press any button.
The display turns on
again.
Dry the dispenser before
adding detergent.
Remove the residue.
The moisture will
evaporate after a short
time.
Before fixing the fault:
– Turn the dishwasher off
s.
Clean the triple filter.
See "User Maintenance
Instructions".
Clean the drain pump and
the non-return valve.
See "User Maintenance
Instructions".
Remove any kinks from
the drain hose.