Mps Configuration - Asus Motherboard P5CR-VM User Manual

Legacy USB Support [Auto] Legacy USB Support [Auto] Legacy USB Support [Auto] Legacy USB Support [Auto] Legacy USB Support [Auto]
Allows you to enable or disable support for legacy USB devices. Setting to
Auto allows the system to detect the presence of USB devices at startup.
If detected, the USB controller legacy mode is enabled. If no USB device is
detected, the legacy USB support is disabled. Configuration options:
[Disabled] [Enabled] [Auto]
USB 2.0 Controller [Enabled] USB 2.0 Controller [Enabled] USB 2.0 Controller [Enabled] USB 2.0 Controller [Enabled] USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed]
USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed] USB 2.0 Controller Mode [HiSpeed]
Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or
FullSpeed (12 Mbps). Configuration options: [FullSpeed ] [HiSpeed ]
4.4.2 4.4.2 4.4.2

MPS Configuration

MPS Configuration MPS Configuration
4.4.2 4.4.2 MPS Configuration MPS Configuration
This menu allows you to configure the Multi-Processor table. Select an item
then press <Enter> to display the configuration options.
MPS Configuration
MPS Revision
MPS Revision [1.4] MPS Revision [1.4] MPS Revision [1.4]
MPS Revision [1.4] MPS Revision [1.4]
Allows you to choose the MPS revision.
Configuration options: [1.1] [1.4]
4 - 2 0 4 - 2 0
4 - 2 0 4 - 2 0 4 - 2 0
[1.4]
Select MPS Revision.
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p