Frequently Asked Questions; Technical Faults - Miele DISHWASHER G 4570 Operating Instructions Manual

,
Repairs should only be carried out by a qualified and trained person in
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage.

Technical faults

Problem
The dishwasher
does not start.
The dishwasher
stops during a
program.
The buzzer sounds.
All indicator lights
of the program
selection flash
when the door is
open.
The drain pump
may also be
running when the
door is open.
Possible fault
The door is not properly
closed.
The machine is not
plugged in.
The circuit breaker has
tripped.
The dishwasher is not
turned on.
The circuit breaker has
tripped.
There may be a
technical fault.
The waterproof system
has activated.

Frequently Asked Questions

Solution
Push the door firmly shut.
Insert the plug.
Reset the circuit breaker
(see the data plate for minimum
amperage).
Press the U button and select a
program.
– Reset the circuit breaker (see
the data plate for minimum
amperage).
– If the circuit breaker trips
again, contact Miele.
– Turn the dishwasher off with
the V button.
After a few seconds:
– Turn the dishwasher on.
– Select the desired program
with the Program selection
button.
– Close the door.
If the indicator lights flash again,
a technical fault has occurred.
– Contact Miele.
– Turn off the water supply.
– Contact Miele.
35