Advertisement
IX. DUAL TIMER
Press button D to enter Dual Timer mode.
Hold button C until the hour digits are flashing to enter timer setting mode.
Press button B to adjust the flashing digit and then press button A to confirm.
Right after the confirmation, minutes digits will then start to flicker. Press button B again to adjust and button C.
Repeat the above process to set the correct time and press button C to confirm.
Press button A to start/stop and B to reset
A beeping alert sound will be turned on at the last 3 seconds and then an alarm will sound when the timer is up.
Simultaneously, the timer cycle counter will increment by 1 for every completion of the count down.
SINGLE TIMER COUNTING: A-A-B
-
To have single timer counting, just set Timer 1 and let Timer 2 be zero, press button A to start/stop
and then B to reset.
DUAL TIMER COUNTING: A-A-B
-
To have dual timer counting, set both Timer 1 and Timer 2, press button A to start/stop and then B
to reset. For an example of a boxing match, you can set Timer 1 with 3 minutes and Timer 2 with 1
minute for an interval.
X. STROKE FREQUENCY COUNTER
Press button D to enter Stroke Counter mode.
Press button A to start and A again to stop after the third stroke was made. The number of strokes per minute
will then be displayed.
Press button B to reset.
The measurable number of strokes per minute is between 10 and 180.
"Err" will be displayed when there is an error of out of range measurement.
Advertisement
