Advertisement
Quick Links
FEATURES
Stopwatch
Able to measure 9 hours, 59 minutes, and 59.99 seconds in 1/100 second
Split Time/Lap Measurement
Up to 10 split time and lap time can be measured
Memory alert on last 5 available memory
Two Line Display
Total elapse time, split time or lap time are displayed at the same time in separate rows
Dual Timer with Cycle Counter
2 count down timer each count up to 9 hour 59 minutes 59 seconds can be operated consecutively for a
maximum of 99 cycles
Stroke (Frequency Counter)
Calculate stroke frequency from 11 to 180 per minute
I. BATTERY INSTALLATION
Remove the back cover and the battery mounting by using a screwdriver
Install the battery with the positive (+) pole facing the back cover
Replace the battery mounting and back cover
Should the LCD show irregular figures, take out the battery and install again
AccuTech Memory Stopwatch
Operating Instructions
Advertisement
Summary of Contents for Rebco AccuTech
-
Page 1: Operating Instructions
AccuTech Memory Stopwatch Operating Instructions FEATURES Stopwatch Able to measure 9 hours, 59 minutes, and 59.99 seconds in 1/100 second Split Time/Lap Measurement Up to 10 split time and lap time can be measured Memory alert on last 5 available memory... - Page 2 II. DISPLAY FORMAT IN DIFFERENT MODE Press button D to switch to different modes Calendar Clock → (Press D) → Daily Alarm → (Press D) → Lap → (Press D) → Split → (Press D) → Dual Timer → (Press D) → Stroke → (Press D) → Back to Calendar Clock III.
- Page 3 IX. DUAL TIMER Press button D to enter Dual Timer mode. Hold button C until the hour digits are flashing to enter timer setting mode. Press button B to adjust the flashing digit and then press button A to confirm. Right after the confirmation, minutes digits will then start to flicker.