Airlink101 Redwing CDMA Quick Start Manual page 5

For alltel
Hide thumbs Also See for Redwing CDMA:
Table of Contents

Advertisement

Redwing CDMA for Alltel - Quick Start, version 2.40
6.
September 2006
If you do not have a private network account and you did not select Setup
Note:
Private Networking from the task menu, this section of the Setup Wizard will not
be displayed, skip to the next section of the Quick Start Guide.
The Primary Home Agent (Primary HA) and Secondary Home Agent (Secondary HA) are
the network servers responsible for IP addressing and routing.
for you with defaults for Alltel.
HA SPI and AAA SPI, required for authentication on the Primary and Secondary Home
Agents, is provided by Alltel.
If you access this option after activating the modem, the Setup Wizard will Test the
Redwing's connection to Alltel to ensure the private networking configuration is
correct.
Test Modem Setup
Your Redwing's connection to the Alltel cellular network is tested.
Green checks in the boxes indicate the tests were successful and your Redwing is functioning prop-
erly. At this point your modem is configured and activated to work on the Alltel network.
This may be filled in for you with the default for Alltel.
Note:
strength of your signal, may take a few
minutes. Initially, while the tests are being
performed, there may be red Xs in the
boxes.
These values may be filled in
These tests, depending on the
4

Advertisement

Table of Contents
loading

Table of Contents