Table of Contents
Advertisement
2.
PRoGRAM InsTAllATIon
2.1. InTRoDUCTIon
This section describes step-by-step method to install
WM-D300 Usb MoDeM and MTs Connect software.
2.2. MInIMUM sysTeM ReQUIReMenT
2.2.1.
PC Hardware
• Recommend to use PC/notebook at speed of 300 MHz
or higher. Minimum 233 MHz speed required, Intel
Pentium/Celeron products, AMD k6/Athlon/Duron
products or compatible processors
• Recommend to use 128Mb RAM or higher
• Minimum of 64Mb memory is required, however, the
performance will be degraded and certain features will
be limited.
• At least 100 Mb of free hard disk space is required.
• Motherboard or PCI card that supports Usb.
• Video adaptor with super VGA (800 × 600) or higher
resolution and Monitor
• CD-RoM or DVD optical Drive
• keyboard and Mouse
7
Advertisement
Table of Contents
Need help?
Do you have a question about the WM-D300 and is the answer not in the manual?
Questions and answers