Advertisement
Quick Links
Sail No:
303 Wide
Owner's Manual
Manufactured by
Hansa Sailing Systems Pty Ltd
ABN 56 079 318 031
Head Office: 9/4 Cumberland Avenue
SOUTH NOWRA NSW 2541 AUSTRALIA
Postal: PO Box 5048 NOWRA DC NSW 2541
Telephone: +61 2 4403 0595
Facsimile: +61 2 4403 0598
Email: admin@hansasailing.com
Website: www.hansasailing.com
Advertisement
Related Manuals for Hansa Sailing 303 Wide
Summary of Contents for Hansa Sailing 303 Wide
- Page 1 Sail No: 303 Wide Owner’s Manual Manufactured by Hansa Sailing Systems Pty Ltd ABN 56 079 318 031 Head Office: 9/4 Cumberland Avenue SOUTH NOWRA NSW 2541 AUSTRALIA Postal: PO Box 5048 NOWRA DC NSW 2541 Telephone: +61 2 4403 0595 Facsimile: +61 2 4403 0598 Email: admin@hansasailing.com...
-
Page 2: Table Of Contents
Index Introduction ........................3 Specification (Hansa 303 Wide Seat) ................4 General ..........................5 Maintenance & Repairs ....................6 Safety Recommendations ....................7 How to Rig a 303 Wide ...................... 8 Warranty ........................11 Change of Ownership ...................... 12... -
Page 3: Introduction
Your Hansa Sailing Distributor, National Sailing Federation or Yacht Club will be pleased to advise you of nearby sailing schools or instructors. -
Page 4: Specification (Hansa 303 Wide Seat)
Steered by manual joystick Mainsail is reefed and un-reefed by a single hauling line Jib is reefed and un-reefed by a single hauling line Mainsail and jib controlled by manual sheets Electric Controls Servo-assist is not recommended for the 303 Wide... -
Page 5: General
The sail area can be reduced or increased whilst under way using a reef furling system operated by hauling on a single continuous line. (For further information on reefing see: “How to Rig a 303 later in this guide). Included with your 303 Wide: Hansa 303 Wide Hull ... -
Page 6: Maintenance & Repairs
Maintenance It is recommended that the boat is covered when not in use to prevent UV and other weather damage. A specially designed cover is available from Hansa Sailing Systems for this purpose. If sails are to be left furled on the mast when the boat is not in use it is recommended that these are covered using a protective sail sock to prevent UV and other weather damage. -
Page 7: Safety Recommendations
Safety Recommendations Hansa Sailing craft are designed with a hull form and other features which combine to give considerable stability. There is a simple set of rules which should be followed to maintain the boats’ excellent safety record and prevent any accidents. The stability of Hansa Sailing craft... -
Page 8: How To Rig A 303 Wide
How to Rig a 303 Wide... - Page 9 How to Rig a 303 Wide SETTING UP Place the hull on a soft surface well clear of any overhead wires and facing toward the wind STEPPING THE MAIN MAST 1. Ensure the mainsail (inner) reefing line knot is positioned as far forward as it will go on the port (left) side 2.
- Page 10 REEFING THE MAINSAIL (shortening sail) 1. You can put one complete turn of sail around the mast without adjusting the outhaul 2. With the outhaul un-cleated on the boom and the outhaul ring free to travel, pull on the port reefing line to reduce sail area 3.
-
Page 11: Warranty
WARRANTY 1. The Company (Hansa Sailing Systems Pty Ltd) warrants to the Customer that the Goods will be free from defects in materials and workmanship for a period of twelve months from the date of delivery to the Customer (the “warranty period”). Provided the Customer makes a full... -
Page 12: Change Of Ownership
IHCA. In order for the register to be kept up to date, please advise Hansa Sailing or the IHCA of any change of ownership. The form below is provided for you to photocopy and use to provide this information if you dispose of the boat.