Miele CERAMIC COOKTOP KM 452 Installation Instructions Manual page 9

,
CAUTION: Before servicing,
disconnect the power supply by
either removing the fuse, shutting off
the power main or manually
"tripping" the circuit breaker.
Installation work and repairs should
only be performed by a qualified
technician in accordance with all
applicable codes and standards.
Repairs and service by unqualified
persons could be dangerous and
the manufacturer will not be held
responsible.
Before connecting the appliance to
the power supply, make sure that the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This
data must correspond to prevent
machine damage. Consult an
electrician if in doubt.
Only operate the cooktop once it
has been installed into the
countertop.
The cooktop is equipped with a flexible
power cord consisting of 3 wires ready
for connection to a grounded power
supply:
– 120/240 V, 60 Hz, 50 A fuse rating
or
– 120/208 V, 60 Hz, 50 A fuse rating
Black wire: connect to L1 (hot)
Red wire: connect to L2 (hot)
Green wire: connect to GND (ground)
A dedicated line and junction box
should be used to connect the cooktop
to a 50 A circuit.
For further information, see the wiring
diagram provided with the appliance.
9