Download Print this page

Walkera Runner 250 Quick Start Manual

Hide thumbs Also See for Runner 250:

Quick start manual (24 pages)

Quick installation manual (12 pages)

Manual (3 pages)

Table Of Contents

Table of Contents

Contents
Overview
Product View
Remote Controller
Specifications
Attention before Flight
Charge the Battery
Assembly
Install Propellers
Gravity Center Adjustment
Ready for Flight
Binding
Compass Calibration
Gyro Calibration
Accelerometer Calibration
GPS Indicator Lights
Operational Instruction
Motor Unlock/Lock
Throttle
Pitch/Roll (Lean)/Yaw (Turn)
The Aircraft Roll Forward
The Aircraft Roll Backward
The Aircraft Roll Left/Right
GPS Hold Mode
End Flight
Return to Home
Dream Baron
Remote Controller Setting
Boot Screen (Main Interface)
Model Select/Model Name
Wing Type
Device Output
Reverse Switch
Video Setting and OSD Information
Selec
Name
Type
Wing
Emitter Transmitting Channel Selection
Outpu
Revsw
Introduction for Power Board
Main Controller
Upgrade
Camera Instructions
Blushless ESC and Blushless Motor Connection Diagram
Picture Illustration
Warm Tips
Photo Instruction
Remote Controller Operation
Manual Operaion (Video/Photo)
Instructions for Balance Charger

Quick Links

1 Contents
2 Remote Controller
3 Binding
4 Ready for Flight
Download this manual

Need help?

Do you have a question about the Runner 250 and is the answer not in the manual?

Questions and answers

Mark Vallejo

March 31, 2025

RED LIGHTS CONTINUS BLINKING

1 comments:

Mr. Anderson

March 31, 2025

If the red lights are continuously blinking on a Walkera Runner 250, it may indicate a problem with binding. If binding is unsuccessful, the issue could be due to broken wires near the stock antenna mounts, which are fragile and can break easily, especially after a crash.

This answer is automatically generated