Table of Contents
Advertisement
3. Installation
3.1
Hardware Installation
Step 1:
Place the WLAN Broadband Router to the best optimum transmission location. The best transmission
location for your WLAN Broadband Router is usually at the geographic center of your wireless
network, with line of sign to all of your mobile stations.
Step 2:
Connect the WLAN Broadband Router to your wired network. Connect the Ethernet WAN interface of
WLAN Broadband Router by category 5 Ethernet cable to your switch/ hub/ xDSL modem or cable
modem. A straight-through Ethernet cable with appropriate cable length is needed.
Step 3:
Plug in the DC power to the WLAN Broadband Router. Use only the AC/DC power adapter supplied
with the WLAN Broadband Router; it maybe occur damage by using a different type of power adapter.
The hardware installation finished.
3.2
Software Installation
There are no software drivers or utilities installation needed, but only the
configuration setting. Please refer to chapter 4 for software configuration.
Notice:
It will take about 50 seconds to complete the boot up sequence after powered on the WLAN
Broadband Router; Power LED will be active, and after that the WLAN Activity LED will be flashing
to show the WLAN interface is enabled and working now.
- 10 -
WLAN Broadband Router
User Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the LP-8696C and is the answer not in the manual?