Charging Portable Devices; Led Flashlight - Zeta ZT50410 User Manual

For charging smartphones or portable devices:
1. Plug in your own USB cable or use the 4 in 1
USB cable provided with this kit to the USB
5V 2A output port.
2. The pocket jump starter will autodetect and
start charging the phone or tablet when it is
connected.
Note 3: Depending your mobile device, you may not need the maximum output of 5V
Your own device will determine the maximum output needed to recharge.
Turn on the LED flash light
Press and hold the switch button for 3 seconds to turn on the LED flash light, then as you
press the switch button again, 3 different modes will appear in the sequence (continuous on,
strobing, S.O.S.)
2A from the USB port.
10