Buzzer - Miele Novotronic T 220 Operating Instructions Manual

Programmable functions

Buzzer

An audible tone sounds repeatedly at
the end of a programme.
The buzzer is activated as standard
ex-works. It can be deactivated is
wished.
Follow steps A to G to programme and
store in memory.
The programmable functions are acti-
vated with the help of the START button
and the programme selector.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at Finish .
A Press the START button and keep it
pressed in whilst carrying out steps
B to C.
B Switch the dryer on with the I-On /
0-Off button.
C Wait until the START indicator lamp
comes on . . .
D . . . and then release the START but-
ton.
42
E Turn the programme selector to the
COTTONS Hand iron position.
– If the Drying indicator lamp is flash-
ing, the buzzer is activated.
– If the Drying indicator lamp is flash-
ing, the buzzer is deactivated.
F Pressing the START button switches
between activating and deactivating
the buzzer.
G Switch the machine off with the I-On /
0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check:
^ Carry out steps A to E.
If the indicator lamp for Drying
flashes =
The Buzzer is activated
does not light up =
The Buzzer is deactivated
^ Switch off the dryer.
The check is complete.