Proctor PCW 207R User Manual page 11

Additionally, users can change the IP Ca
or Static IP directly in the device nding list. Refer to the following section for
changing the IP Camera's network property.
Example of Changing IP Camera's Network Property
Users can directly change an IP Camera's net
DHCP, in the nding device list. The wa
property is speci ed below:
Step 1: In the nding device list, click on the IP Camera that you would like
Step 2: The "Network Setup" page will come
Step 3: Click on <OK> on the Note of setting change. Wait for one minute to
Step 4: Click on the <Device Search> button to
Step 5: Enter User name and Password to access the IP Camera.
Installing DC Viewer Software Online
For the initial access to the IP Came
automatically installed to your PC when connecting to the IP Camera.
If the Web browser doesn't allow DC View
Internet security settings or Active X controls and plug-in s settings (refer to
Section: Internet Security Settings
The Information Bar (just below th e URL bar) may come out and ask for
permission to install the ActiveX Control
click on the Information Bar and select <I
installation.
10
to change its network property. On t he selected item, right click and
select "Network Setup." Meanwh ile, record the IP Camera's MAC
address, for future identi cation.
"Apply" button down the page.
re-search the IP Camera.
select the IP Camera with the co
the IP Camera, and the login window will come out.
mera's network property, either DHCP
work property, ex. fr om static IP to
y to change the IP Camera's network
out. Select "DHCP," and press
re-search all the devices. Then
rrect MAC address. Double click on
ra, a client program, DC Viewer, will be
er installation, please check the
) to continue the process.
for displaying video in browser. Right
nstall ActiveX Control...> to allow the