Foot Controller - Royal EVA 8700 Instruction Manual

FOOT CONTROLLER

When the foot controller is connected, the speed of the machine is controlled
by the footcontroller and not the speed control button as described on page 13
CAUTION: To prevent accidents.
1. Turn off the power switch.
2. Push foot controller plug into the jack on the machine.
3. Place foot controller at your feet and turn on power switch.
Sew faster by increasing the pressure on the controller.
To stop, remove your foot from the controller.
CONTROL BUTTON FUNCTIONS
The control button functions described on
previous page will change when the foot
control is connected.
See previvous page
WARNING: -To reduce the risk of burns, fire, electric shock,
1. Handle the foot controller with care and avoid dropping it on the floor. Be sure not
To place anything on top of it.
2. Use only foot controller provided with this machine.
or injury to persons.
14
1
SAFETY FEATURE OF ELECTRONIC MODEL
If the machine is jammed, it will stop with three
beep sounds. After the cause of jamming is
removed, step on the foot control and it will
run in normal condition.
2