Midland GXT500 ,GXT550, GXT565 Owner's Manual page 12

Model GXT500/550/565 Series
®
VIBRATE ALERT
To turn the VIBRATE ALERT on, press the MENU button five times so
the display will show the VIBRATE-ALERT icon blinking, while on the
right of the CHANNEL NUMBER, an "oF" icon appears. Select "on"
/
by pressing the buttons and push the PTT button, or press MENU
button again to move to the next feature setting. The VIBRATE
ALERT icon will remain on the display.
To turn the VIBRATE ALERT off, press the MENU button five times,
so the display will show the VIBRATE ALERT icon blinking, while on
the right of the CHANNEL NUMBER, an "on" icon appears. Select
/
"oF" by pressing the buttons and push the PTT button, or press
MENU button to move to the next feature setting. The VIBRATE
ALERT icon will go off.
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the
display shows an "rb" icon while on the right of the "rb" display, an
/
"oF" icon appears. Select "on" by pressing the buttons and push
the PTT key, or press MENU button to move to the next feature
setting.
To turn the ROGER BEEP tone off, press the MENU button until the
display shows an "rb" icon while on the right of the "rb" display, an
"on" icon appears. Select "oF" by pressing the buttons and push
/
the PTT key, or press MENU button to move to the next feature
setting.
Page 12 www.midlandradio.com