Table of Contents
Advertisement
CONTROLS:
AM-FM mode it also acts as the on switch for the AM-FM radio if you have
activated the weather receiver.
4. Alert LED Indicator – This light emitting diode visual indicator tells you when the
unit is in the alert mode. It is normally a steady light. If an emergency broadcast
is received this indicator will pulse on and off.
7.
Telescopic Antenna – Extends fully for best reception.
10. External Antenna – Allows you the option to plug in an optional external
antenna for better reception inside your home or car, or from distant weather
stations.
11. Power Jack – A power jack is located on the side of the unit for use with an AC
adapter or optional 12 Volt adapter.
12. Weather Channel Selector Switch – Allows you to select the proper weather
channel for your area. This switch is recessed on the bottom of the unit and
1.
2.
is a momentary switch bar. Pressing
and holding it down lets you check to
see that your WR-10 tone coded alert
system is operating. A loud siren-type
sound will be emitted from the speaker
if the ALERT switch is set to LED &
ALARM.
3.
Alert Bar Button – This is a push on
switch. It switches the special alert tone
coding system on so you can receive
emergency weather broadcasts. In the
5.
Tuning Dial – This dial lets you
select AM or FM stations
6.
WX-AM-FM
Lets you select AM broadcasts, FM
broadcasts
broadcasts
8.
Off/On/Volume Control – This
is the volume control and the main
power switch. It lets you adjust
volume to the desired listening
level.
9.
External Alert Device Jack –
Allows
connection
alerting devices such as X-10.
4
Alert Test Button – This
Mode Switch –
or
weatherband
of
external
Advertisement
Table of Contents
