INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE Getting Started Remove the unit from the box. Remove any packaging from the product. Please retain all packaging until you have checked and counted all the parts and the contents against the package contents.
Do not use the handset at excessive levels as damage to hearing may occur. Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire or the like. Description of Parts...
Activate the Bluetooth function on your Bluetooth Device (Mobile Phone or Tablet). Please refer to manufacturer’s instructions for instructions on enabling Bluetooth on your device. Once you have activated Bluetooth on your device, select the device “Denali Audio S1008” from the list of available Bluetooth devices.
Once you have paired the Bluetooth speaker with a device, the speaker will remember this device and will pair automatically when the device’s Bluetooth is activated and in range. You do not need to re-pair any previously connected devices. The Bluetooth speaker will attempt to automatically connect to the last device it was paired with when switched on.
At this point, activate the Bluetooth function on your mobile device, and search for Bluetooth devices near you. Your mobile device should show one of “Denali Audio S1008” instead of two in list, (This is the host speaker. The reason you don’t see subordinate speaker in the list of available devices is that it is already paired with the host speaker).
Dimension: 4.5” (L) x 3.0” (D) x 7.5” (H) per speaker Weight: 1.4 lbs each speaker Power Input: DC 5V Charging time: 4 to 5 hours Play time: 4 to 5 hours (50% volume) Built-In Rechargeable Battery: 3.7V 1000mAh (Note: Battery life & charging time may vary based on usage & types of devices used.) Troubleshooting Problem Possible Cause...
NOTE: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 9
NOTE: Manufacturer cannot assume responsibility for loss or damage during incoming shipment. As a precautionary measure, carefully package the product for shipment, and insure it with the carrier. Be sure to enclose the following details with the product: your full name, return address and daytime phone number, a note describing the problem you experienced, a copy of your sales receipt or other proof of purchase to determine warranty status.